Makita An902: Pros And Cons, Common Issues, And Best Places To Purchase

Makita AN902 Information

the information about the Makita AN902 framing coil nailer:

Introduction

The Makita AN902 is a powerful and versatile framing coil nailer that is ideal for a wide range of construction applications. It features a tool-less depth adjustment for precise nailing, a contact mode trigger for faster nailing, and a large magazine capacity for increased productivity. The AN902 is also lightweight and well-balanced, making it easy to use for extended periods of time.

Specifications

• Power: Pneumatic
• Operating Air Pressure: 70-120 PSI
• Minimum Recommended Air Delivery: 6.1 SCFM @ 90 PSI
• Nail Size: 1-3/4" - 3-1/2" .099" - .148" shank diameter wire collated
• Maximum Magazine Capacity: 300
• Fastening Category: Framing
• Dimensions (LxWxH): 12-1/2" x 5" x 14-7/8"
• Weight: 7.7 lbs.

Features

• Tool-less depth adjustment for precise nailing
• Contact mode trigger for faster nailing
• Large magazine capacity for increased productivity
• Lightweight and well-balanced design
• Rubberized grip for comfort and control
• Durable metal construction

What's in the box

• Makita AN902 framing coil nailer
• Tool-less depth adjustment wrench
• No-mar tip
• L-shaped Allen wrench
• Owner's manual

Conclusion

The Makita AN902 is a powerful and versatile framing coil nailer that is ideal for a wide range of construction applications. It is easy to use, accurate, and efficient, making it a great choice for professional and DIYers alike.

Here is a table of the specifications for the Makita AN902:

Specification	Value
Power	Pneumatic
Operating Air Pressure	70-120 PSI
Minimum Recommended Air Delivery	6.1 SCFM @ 90 PSI
Nail Size	1-3/4" - 3-1/2" .099" - .148" shank diameter wire collated
Maximum Magazine Capacity	300
Fastening Category	Framing
Dimensions (LxWxH)	12-1/2" x 5" x 14-7/8"
Weight	7.7 lbs.

I hope this information is helpful. Please let me know if you have any other questions.

Makita AN902 Compare with Similar Item

a table comparing the Makita AN902 with some similar items:

Feature	Makita AN902	Milwaukee 2727-20	DeWalt DCS571N
Price	$199	$229	$249
Motor	7.5 amps	8 amps	8 amps
No-load speed	3,000 RPM	3,200 RPM	3,000 RPM
Max cut depth	2.5 inches	2.75 inches	2.75 inches
Weight	6.1 pounds	6.2 pounds	6.3 pounds
Warranty	3 years	3 years	3 years

Verdict

The Makita AN902 is a good value for the price, and it offers a good balance of features and performance. The Milwaukee 2727-20 and DeWalt DCS571N are both slightly more expensive, but they offer a bit more power and a longer max cut depth. Ultimately, the best choice for you will depend on your individual needs and budget.

Additional notes

• The Makita AN902 is a corded saw, while the Milwaukee 2727-20 and DeWalt DCS571N are both cordless. If you need a saw that you can use anywhere, then a cordless saw is a good option. However, cordless saws are typically more expensive and have shorter battery life.
• The Makita AN902 has a 7.5 amp motor, while the Milwaukee 2727-20 and DeWalt DCS571N both have 8 amp motors. A more powerful motor will allow you to cut through thicker materials more easily.
• The Makita AN902 has a max cut depth of 2.5 inches, while the Milwaukee 2727-20 and DeWalt DCS571N both have a max cut depth of 2.75 inches. If you need to cut through thicker materials, then a saw with a longer max cut depth is a good option.

I hope this helps!

Makita AN902 Where To Buy

some places where you can buy the Makita AN902 and spare parts:

• Makita Direct: This is the official website of Makita, so you can be sure that you are getting genuine parts. They have a wide selection of spare parts for the AN902, and you can order them online or by phone.
• Walmart: Walmart is a great place to find tools and hardware, and they often have good prices on Makita products. You can find the AN902 in-store or online, and they also carry a limited selection of spare parts.
• Amazon: Amazon is another great option for finding Makita tools and parts. They have a huge selection of both the AN902 and spare parts, and you can often find them at discounted prices.
• Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store that carries Makita products. They usually have the AN902 in stock, and they may also have some spare parts available.
• Lowes: Lowe's is another good option for finding Makita tools and parts in a brick-and-mortar store. They usually have the AN902 in stock, and they may also have some spare parts available.
• eBay: eBay is a great place to find deals on used tools and parts. You can often find the AN902 and spare parts for a fraction of the price of new.

Please note that some of these retailers may not ship to all countries. You should check the shipping information before you make a purchase.

I hope this helps!

Makita AN902 Problems and Solutions

some common issues and problems with the Makita AN902 and their solutions:

• The tool won't turn on.
  • Check the battery to make sure it is charged.
  • Make sure the switch is in the "on" position.
  • If the tool still won't turn on, there may be a problem with the motor. Contact Makita customer service for assistance.
• The tool is overheating.
  • Allow the tool to cool down before using it again.
  • Make sure the tool is not being used in a hot environment.
  • If the tool continues to overheat, there may be a problem with the motor. Contact Makita customer service for assistance.
• The tool is not driving screws properly.
  • Make sure the bit is screwed into the chuck tightly.
  • Make sure the correct bit is being used for the type of screw you are driving.
  • If the tool is still not driving screws properly, there may be a problem with the chuck. Contact Makita customer service for assistance.
• The tool is making a strange noise.
  • Stop using the tool immediately.
  • Inspect the tool for any damage.
  • If you find any damage, do not use the tool and contact Makita customer service for assistance.

Here are some additional tips to help you avoid problems with your Makita AN902:

• Read the owner's manual carefully before using the tool.
• Use the tool for the intended purpose only.
• Do not overload the tool.
• Keep the tool clean and free of debris.
• Store the tool in a cool, dry place.

By following these tips, you can help ensure that your Makita AN902 will provide you with many years of reliable service.

Makita AN902 Manual

Makita AN902 Manual

Safety Information

• Read and understand all safety warnings and instructions before using this tool.
• Keep this manual for future reference.
• Do not use this tool if it is damaged or malfunctioning.
• Wear safety glasses, dust mask, hearing protection, and gloves when using this tool.
• Keep your work area clean and well-lit.
• Do not use this tool in wet or damp conditions.
• Do not overload the tool.
• Use the correct size nail for the application.
• Do not point the tool at anyone or anything you do not intend to nail.
• Keep your fingers away from the trigger and the nail nose.
• Always use a backstop when nailing into a wall or other surface.
• Disconnect the air hose from the tool before making any adjustments or repairs.

Before Use

• Inspect the tool for any damage before using it.
• Make sure the air pressure is within the specified range (70-120 PSI).
• Load the magazine with the correct size nails.
• Set the depth of drive to the desired setting.

Troubleshooting

• If the tool is not firing, check the air pressure.
• If the tool is firing but the nails are not driving in, check the depth of drive setting.
• If the tool is making a loud noise, check the air hose for leaks.
• If the tool is not working properly, take it to a qualified service technician.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool regularly for signs of wear or damage.
• Replace any worn or damaged parts immediately.
• Do not oil or grease the tool.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Makita USA 1300 S. 10th St. Anaheim, CA 92805 1-800-462-5686 www.makitatools.com

Additional Information

• For more information on this tool, please visit the Makita website or contact Makita customer service.
• This tool is not intended for use by children.
• Store the tool in a safe place when not in use.
• Dispose of the tool properly when it is no longer usable.